# Visualizing Tabular Data

Last updated on 2023-11-07 | Edit this page

## Overview

### Questions

- How can I visualize tabular data in Python?
- How can I group several plots together?

### Objectives

- Plot simple graphs from data.
- Plot multiple graphs in a single figure.

## Visualizing data

The mathematician Richard Hamming once said, “The purpose of
computing is insight, not numbers,” and the best way to develop insight
is often to visualize data. Visualization deserves an entire lecture of
its own, but we can explore a few features of Python’s
`matplotlib`

library here. While there is no official
plotting library, `matplotlib`

is the *de facto*
standard. First, we will import the `pyplot`

module from
`matplotlib`

and use two of its functions to create and
display a heat map of our
data:

### Episode Prerequisites

Each row in the heat map corresponds to a patient in the clinical trial dataset, and each column corresponds to a day in the dataset. Blue pixels in this heat map represent low values, while yellow pixels represent high values. As we can see, the general number of inflammation flare-ups for the patients rises and falls over a 40-day period.

So far so good as this is in line with our knowledge of the clinical trial and Dr. Maverick’s claims:

- the patients take their medication once their inflammation flare-ups begin
- it takes around 3 weeks for the medication to take effect and begin reducing flare-ups
- and flare-ups appear to drop to zero by the end of the clinical trial.

Now let’s take a look at the average inflammation over time:

### PYTHON

```
ave_inflammation = numpy.mean(data, axis=0)
ave_plot = matplotlib.pyplot.plot(ave_inflammation)
matplotlib.pyplot.show()
```

Here, we have put the average inflammation per day across all
patients in the variable `ave_inflammation`

, then asked
`matplotlib.pyplot`

to create and display a line graph of
those values. The result is a reasonably linear rise and fall, in line
with Dr. Maverick’s claim that the medication takes 3 weeks to take
effect. But a good data scientist doesn’t just consider the average of a
dataset, so let’s have a look at two other statistics:

The maximum value rises and falls linearly, while the minimum seems to be a step function. Neither trend seems particularly likely, so either there’s a mistake in our calculations or something is wrong with our data. This insight would have been difficult to reach by examining the numbers themselves without visualization tools.

### Grouping plots

You can group similar plots in a single figure using subplots. This
script below uses a number of new commands. The function
`matplotlib.pyplot.figure()`

creates a space into which we
will place all of our plots. The parameter `figsize`

tells
Python how big to make this space. Each subplot is placed into the
figure using its `add_subplot`

method. The `add_subplot`

method takes 3 parameters. The first denotes how many total rows of
subplots there are, the second parameter refers to the total number of
subplot columns, and the final parameter denotes which subplot your
variable is referencing (left-to-right, top-to-bottom). Each subplot is
stored in a different variable (`axes1`

, `axes2`

,
`axes3`

). Once a subplot is created, the axes can be titled
using the `set_xlabel()`

command (or
`set_ylabel()`

). Here are our three plots side by side:

### PYTHON

```
import numpy
import matplotlib.pyplot
data = numpy.loadtxt(fname='inflammation-01.csv', delimiter=',')
fig = matplotlib.pyplot.figure(figsize=(10.0, 3.0))
axes1 = fig.add_subplot(1, 3, 1)
axes2 = fig.add_subplot(1, 3, 2)
axes3 = fig.add_subplot(1, 3, 3)
axes1.set_ylabel('average')
axes1.plot(numpy.mean(data, axis=0))
axes2.set_ylabel('max')
axes2.plot(numpy.amax(data, axis=0))
axes3.set_ylabel('min')
axes3.plot(numpy.amin(data, axis=0))
fig.tight_layout()
matplotlib.pyplot.savefig('inflammation.png')
matplotlib.pyplot.show()
```

The call to
`loadtxt`

reads our data, and the rest of the program tells
the plotting library how large we want the figure to be, that we’re
creating three subplots, what to draw for each one, and that we want a
tight layout. (If we leave out that call to
`fig.tight_layout()`

, the graphs will actually be squeezed
together more closely.)

The call to `savefig`

stores the plot as a graphics file.
This can be a convenient way to store your plots for use in other
documents, web pages etc. The graphics format is automatically
determined by Matplotlib from the file name ending we specify; here PNG
from ‘inflammation.png’. Matplotlib supports many different graphics
formats, including SVG, PDF, and JPEG.

### Importing libraries with shortcuts

In this lesson we use the `import matplotlib.pyplot`

syntax to import the
`pyplot`

module of `matplotlib`

. However,
shortcuts such as `import matplotlib.pyplot as plt`

are
frequently used. Importing `pyplot`

this way means that after
the initial import, rather than writing
`matplotlib.pyplot.plot(...)`

, you can now write
`plt.plot(...)`

. Another common convention is to use the
shortcut `import numpy as np`

when importing the NumPy
library. We then can write `np.loadtxt(...)`

instead of
`numpy.loadtxt(...)`

, for example.

Some people prefer these shortcuts as it is quicker to type and
results in shorter lines of code - especially for libraries with long
names! You will frequently see Python code online using a
`pyplot`

function with `plt`

, or a NumPy function
with `np`

, and it’s because they’ve used this shortcut. It
makes no difference which approach you choose to take, but you must be
consistent as if you use `import matplotlib.pyplot as plt`

then `matplotlib.pyplot.plot(...)`

will not work, and you
must use `plt.plot(...)`

instead. Because of this, when
working with other people it is important you agree on how libraries are
imported.

### Plot Scaling

Why do all of our plots stop just short of the upper end of our graph?

Because matplotlib normally sets x and y axes limits to the min and max of our data (depending on data range)

### Drawing Straight Lines

In the center and right subplots above, we expect all lines to look like step functions because non-integer value are not realistic for the minimum and maximum values. However, you can see that the lines are not always vertical or horizontal, and in particular the step function in the subplot on the right looks slanted. Why is this?

Because matplotlib interpolates (draws a straight line) between the
points. One way to do avoid this is to use the Matplotlib
`drawstyle`

option:

### PYTHON

```
import numpy
import matplotlib.pyplot
data = numpy.loadtxt(fname='inflammation-01.csv', delimiter=',')
fig = matplotlib.pyplot.figure(figsize=(10.0, 3.0))
axes1 = fig.add_subplot(1, 3, 1)
axes2 = fig.add_subplot(1, 3, 2)
axes3 = fig.add_subplot(1, 3, 3)
axes1.set_ylabel('average')
axes1.plot(numpy.mean(data, axis=0), drawstyle='steps-mid')
axes2.set_ylabel('max')
axes2.plot(numpy.amax(data, axis=0), drawstyle='steps-mid')
axes3.set_ylabel('min')
axes3.plot(numpy.amin(data, axis=0), drawstyle='steps-mid')
fig.tight_layout()
matplotlib.pyplot.show()
```

### Make Your Own Plot

Create a plot showing the standard deviation (`numpy.std`

)
of the inflammation data for each day across all patients.

### Moving Plots Around

Modify the program to display the three plots on top of one another instead of side by side.

### PYTHON

```
import numpy
import matplotlib.pyplot
data = numpy.loadtxt(fname='inflammation-01.csv', delimiter=',')
# change figsize (swap width and height)
fig = matplotlib.pyplot.figure(figsize=(3.0, 10.0))
# change add_subplot (swap first two parameters)
axes1 = fig.add_subplot(3, 1, 1)
axes2 = fig.add_subplot(3, 1, 2)
axes3 = fig.add_subplot(3, 1, 3)
axes1.set_ylabel('average')
axes1.plot(numpy.mean(data, axis=0))
axes2.set_ylabel('max')
axes2.plot(numpy.amax(data, axis=0))
axes3.set_ylabel('min')
axes3.plot(numpy.amin(data, axis=0))
fig.tight_layout()
matplotlib.pyplot.show()
```

### Key Points

- Use the
`pyplot`

module from the`matplotlib`

library for creating simple visualizations.