Unit Testing and Standalone Scripts

Introduction

Now that you understand the basics of programming in Python, we'll move on to discuss two topics in "software engineering", which are how to test your code for accuracy and how to turn your code into stand alone scripts, or programs, that you can run from the command line.

To complete this lesson, you'll need to download the files sightings_tab_sm.csv and sightings_tab_lg.csv and place these in the same directory where you will be working on the tutorial files. If you get lost at any point, or just want to see "the answers" you might also want to review the following files for reference:

Please don't open these files now, however, and only consult them later if you get really stuck.

Unit Testing Concepts

As practicing scientists, we would never trust a lab measurement that we made with uncalibrated instruments. Similarly, as computational scientists, we shouldn't trust the results that our code gives us until we have tested it. Without calibration/testing, how do we know that our code is giving us the right answers?

In this lesson, we'll focus on unit tests, perhaps the most basic type of testing that we can run. Unit tests focus on a single "unit" of code, which in our case will be functions that we've written. We'll write tests to ensure that when our function is given a certain set of arguments as input, it generates output that we know to be correct. Once we have a complete test suite for a function, we can run the entire suite to make sure that all the tests pass (ie, that our function gives the correct output for all the combinations of input that we have decided to test).

For example, let's say that we have a function that reads in a data file, does some processing, and returns a result. We can test the function by giving it a small data file, for which we can calculate the correct result by hand, and making sure that the function gives the correct answer for this small file. This gives us more confidence that if we run the function on a different data set, perhaps a huge one for which we can't verify the results by hand, that we'll get an accurate result.

Even better, if we make changes to the internals of our function, we can run our tests again to make sure that we haven't accidentally broken anything (this is known as a "regression"). This makes us more free to continue to improve the performance of our code over time, and avoids the dreaded "it's working, don't touch it" phenomena.

In this lesson, we're going to use the simple and very popular nose package to write and run our tests.

A Unit Testing Example

We'll practice unit testing using a function that we've already written to extract the mean number of animals seen per sighting from a csv file. First, let's place this function in an external module. To do this, copy the code below into a text file in this directory, and name it mean_sightings.py.

import pandas as pd
import numpy as np

def get_sightings(filename, focusanimal):

    # Load table
    tab = pd.read_csv(filename)

    # Find number of records and total count of animals seen
    isfocus = (tab['Animal'] == focusanimal)
    totalrecs = np.sum(isfocus)
    meancount = np.mean(tab['Count'][isfocus])

    # Return num of records and animals seen
    return totalrecs, meancount

This function uses boolean arrays to calculate the total number of records and mean number of animals per sighting for the focus animal.

To confirm that everything's working correctly, open up a new IPython notebook (in this same directory) and run the following in a cell:

from mean_sightings import get_sightings
print get_sightings('sightings_tab_sm.csv', 'Owl')

This should give you the correct answer for the Owl (check to make sure by looking at the raw data file and counting by hand).

Now that we have the function in a module, let's write some unit tests to make sure that the function is giving us the correct answers. Create a new text file called test_mean_sightings.py, which will hold our unit tests. At the top of this file, type (or copy) in the following code, which will import the function that we wish to test and set the filename that we want to use for the testing.

from mean_sightings import get_sightings

filename = 'sightings_tab_sm.csv'

Note that we are using a small, "toy" data set for testing so that we can calculate correct answers by hand.

Now, let's write our first test function, which will simply test to make sure that our function gives the correct answer when called using this small data set and the Owl as arguments. Test functions (written for the nose testing package) can contain any type of Python code, like regular functions, but have a few key features. First, they don't take any arguments. Second, they contain at least one assert statement - the test will pass if the condition following the assert statement is True, and the test will fail if it's False.

An example will make this more clear. Here's a test that checks whether the function returns the correct answers for the small data set and the Owl. Copy and paste this at the end of the test_mean_sightings.py file.

def test_owl_is_correct():
    owlrec, owlmean = get_sightings(filename, 'Owl')
    assert owlrec == 2, 'Number of records for owl is wrong'
    assert owlmean == 17, 'Mean sightings for owl is wrong'

Note that we calculated the correct values of owlrec and owlmean by hand. Make sure that you get these right!

Now we're ready to run our suite of tests (so far, just this one test). Open a command line window, and cd to the directory containing your new Python files. Type nosetests, and examine the output. It should look something like this:

.
----------------------------------------------------------------------
Ran 1 test in 0.160s

OK

The dot on the first line shows that we had one test, and that it passed. There is one character printed for each test. A '.' means the test passed, a 'F' means the test failed, and an 'E' means there was an error in the test function itself.

Just for fun, try changing your test so that it fails (for example, assert that the number of Owl records should be 3). What output do you see now? Don't forget to change the test back so that it passes after you're done.

Exercise 1 - Test the Muskox results

Add an additional test to your test file to make sure that your function also gives the right answer when the animal is a Muskox. Run nosetests and make sure both tests pass.

Great, now we have two tests that pass. However, both of these tests were fairly straightforward, in that they tested the expected behavior of the function under "normal" inputs. What about corner or boundary cases? For example, what should our function do if the animal is not found anywhere in the data set?

Let's say that we decide that our function should return 0 for the number of records and 0 for the mean animals per record if the animal is not found in the data set. Let's write a test to see if our function does this already:

def test_animal_not_present():
    animrec, animmean = get_sightings(filename, 'NotPresent')
    assert animrec == 0, 'Animal missing should return zero records'
    assert animmean == 0, 'Animal missing should return zero mean'

If we run our test suite now, we see that this test fails. The output doesn't give us much of a hint as to what went wrong though - we know that animmean was not equal to zero, but what was it?

To find out, add the line print animrec, animmean right above the first assert statement, run the test suite again, and look at the output. Now we can see that the animmean was 'nan', which stands for "not a number". This is because when an animal is not found, our current function returns 0 for the number of records and 0 for the total count. To calculate the mean, it tries to divide 0/0, and gets 'nan'.

Exercise 2 - Fixing our function for a boundary case

Modify the function get_sightings so that if the animal is not present, both totalrecs and meancount are 0. HINT: Check if totalrecs is zero before calculating meancount - if totalrecs is zero, meancount must also be zero.

Run your test suite again to make sure all three tests now pass.

Here's another special case - all of the animal names in the data sets are capitalized, with the first letter in uppercase and the rest of the letters in lowercase. What if someone enters the name of the animal using the wrong case. For example, they might call the function with the argument 'oWl' for the animal name.

Exercise 3 - Fixing our function for bad input

Write a test function that will pass only if your function returns the correct answer for owls if the input argument focusanimal is set to 'oWl'. Run this test, and see that it currently fails.

Then, modify the function so that this test passes. HINT: You can use the method 'capitalize' on any string to correct its capitalization.

Run your test suite again to make sure all four tests now pass.

Bonus

Determine what your function should return if a user gives the function a file that does not exist. Write a test that checks that this value is indeed returned for the case of a missing file, and modify your function to return it as desired.

You can imagine adding more test functions as you think of more unusual cases that you want your function to correctly address. It is not unusual for the file containing test cases to be several times longer than the file containing the actual functions!

Now we're in a great position - we now have more confidence that our code is doing what we expect it to do.

Now let's say that we are planning to share our code with a colleague who is less experienced with programming, and we think that he/she might not understand the neat boolean indexing tricks that we've been using. For clarity, we decide that we'll replace the guts of our get_sightings function with code that calculates the same thing but uses a for loop instead. We've already written this code in the previous lesson, so we can simply erase our existing get_sightings function and replace it with this code instead:

def get_sightings(filename, focusanimal):

    # Load table
    tab = pd.read_csv(filename)

    # Standardize capitalization of focusanimal
    focusanimal = focusanimal.capitalize()

    # Loop through all records, countings recs and animals
    totalrecs = 0
    totalcount = 0
    for i, rec in tab.iterrows(): # Iterate through DataFrame rows
        if rec['Animal'] == focusanimal:
            totalrecs += 1
            totalcount += rec['Count']

    meancount = totalcount/totalrecs

    # Return num of records and animals seen
    return totalrecs, meancount

Thinking ahead, we made sure to add a line to fix the capitalization problem right away so that our fourth unit test should pass. Since this code worked before, we're confident that it will work now. Just to be sure, though we run our test suite again.

Exercise 4 - Examining and fixing regressions

You are shocked to discover that two of the four tests now fail! How can this be? We were sure that the new for loop code was correct, and we looked at its output before to convince ourselves that it was correct...

Try to uncover the causes of this regression. One failure should have a fairly obvious cause (it relates to the issue of an animal not being present, which we check with the third test). The second failure has a more subtle cause - try to figure out the problem, and correct the function to give the right answer.

As a final note, sometimes you will have many tests in your test*.py file, some which take a bit of time to run. When you are developing a new test, you may not want to keep running all of your longer-running tests each time you run the new test. Fortunately, nosetests makes it really easy to run a specific test(s) from your test*.py file. Taking our example, if I were only interested in running my test_muskox_is_correct test I could simply type

nosetests test_mean_sightings.py:test_muskox_is_correct

This can be quite handy when certain tests aren't behaving as expected.

Making a Standalone Script

Now that our module has been tested, let's turn this program into a standalone script that we can run from the command line. This takes very little additional work, now that we have our function in a module.

At the bottom of the mean_sightings.py, add the following lines:

filename = 'sightings_tab_sm.csv'
focusanimal = 'Owl'
print get_sightings(filename, focusanimal)

Now, head over to the command line and make sure that you're in the directory containing the mean_sightings.py file. Type the statement below then hit return.

python mean_sightings.py

You should see the output (2, 17) printed to the screen, which is the correct number of records and the mean number of animals per record for the Owl in the sightings_tab_sm.csv file.

This is interesting, but it would be much more useful if we could give our command line program arguments, in the same way that we would type cat myfile.txt. For example, we may want to type python mean_sightings.py sightings_tab_sm.csv Owl instead of having to make a change in the file itself each time we want to use a different file and focal animal.

This is actually pretty easy to do using a Python module called sys. At the top of the mean_sightings.py file, add the line

import sys

then at the bottom of the file, change your code to read

filename = sys.argv[1]
focusanimal = sys.argv[2]
print get_sightings(filename, focusanimal)

The variable sys.argv is a list of all of the arguments given on the command line when this file is called (you can see this by putting print sys.argv a the bottom of the script as well. The first argument, sys.argv[0], is always the name of the file that was run - in this case, it's mean_sightings.py. The second and third arguments are stored in sys.argv[1] and sys.argv[2], and we've chosen to use these as the filename and focusanimal.

Now you can simply type

python mean_sightings.py sightings_tab_sm.csv Owl

and you'll get what you were expecting. Try this out with different animals and with the large table. Make sure it works for our special cases that we addressed before, like the capitalization of the animal name being incorrect.

Two more small changes will make our command line script extra professional.

First, we have now changed our file mean_sightings.py so that it runs from the command line, but what if we want to also be able to import functions from it as a module from other Python programs (such as in notebooks when we run import mean_sightings)? The best way to do this is to wrap all of the lines at the bottom of our file (the ones that produce the command line output, not the functions themselves) into a special if statement like so:

if __name__ == '__main__':
    filename = sys.argv[1]
    focusanimal = sys.argv[2]
    print get_sightings(filename, focusanimal)

When a Python script is run from the command line, a special hidden variable called __name__ is set to equal the string __main__. This special if statement thus encloses code that we only want to run when the file is run from the command line, not when it's imported by another file. You'll see this special statement in many Python scripts.

Second, we can set up our file so that it can be executed directly like any other shell script (so that we can run mean_sightings from the command line instead of python mean_sightings). To do this, we have to first tell our shell that when this file is executed directly, it should be run using the python interpreter. To do this, make the very first line of the file

#!/usr/bin/env python

Then, we need to give the file make_animals.py permission to execute on its own. From the command line, in the directory containing the file make_animals.py, run the line

chmod 755 mean_sightings.py

Now we can run our file as a standalone script simply by executing the statement

./mean_sightings.py sightings_tab_sm.csv Owl

That annoying little ./ at the front is because the shell, by default, doesn't look inside your current directory for executable programs - it only looks for executables within directories specified by the PATH shell variable. We'll leave it as an exercise to you to look up how to add a directory to your PATH. If you have certain scripts that you run very often, a common trick is to create a single directory, such as ~/bin/, add this to your PATH permanently by modifying your .bashrc or .bash_profile, and put all of your commonly executed scripts in that directory. Then you will be able to call them from the command line as scriptname, just like all of the built in shell commands.

As a side note, you are free to remove the extension from your script file names if you'd like. For example, you are free to rename mean_sightings.py to mean_sightings - everything will still work as expected.

Facebook Google+ Twitter GitHub RSS License Bug Report