previous episode

Programming with R

next episode

Command-Line Programs

Overview

Teaching: 30 min
Exercises: 0 min
Questions

  • How do I write a command-line script?

  • How do I read in arguments from the command-line?

Objectives

  • Use the values of command-line arguments in a program.

  • Handle flags and files separately in a command-line program.

  • Read data from standard input in a program so that it can be used in a pipeline.

The R Console and other interactive tools like RStudio are great for prototyping code and exploring data, but sooner or later we will want to use our program in a pipeline or run it in a shell script to process thousands of data files. In order to do that, we need to make our programs work like other Unix command-line tools. For example, we may want a program that reads a data set and prints the average inflammation per patient:

$ Rscript readings.R --mean data/inflammation-01.csv
5.45
5.425
6.1
...
6.4
7.05
5.9

but we might also want to look at the minimum of the first four lines

$ head -4 data/inflammation-01.csv | Rscript readings.R --min

or the maximum inflammations in several files one after another:

$ Rscript readings.R --max data/inflammation-*.csv

Our overall requirements are:

  1. If no filename is given on the command line, read data from standard input.
  2. If one or more filenames are given, read data from them and report statistics for each file separately.
  3. Use the --min, --mean, or --max flag to determine what statistic to print.

To make this work, we need to know how to handle command-line arguments in a program, and how to get at standard input. We’ll tackle these questions in turn below.

Command-Line Arguments

Using the text editor of your choice, save the following line of code in a text file called session-info.R:

sessionInfo()

The function, sessionInfo, outputs the version of R you are running as well as the type of computer you are using (as well as the versions of the packages that have been loaded). This is very useful information to include when asking others for help with your R code.

Now we can run the code in the file we created from the Unix Shell using Rscript:

Rscript session-info.R

R version 3.2.3 (2015-12-10)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: Linux Mint 18

locale:
 [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
 [3] LC_TIME=en_US.UTF-8        LC_COLLATE=en_US.UTF-8    
 [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
 [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
 [9] LC_ADDRESS=C               LC_TELEPHONE=C            
[11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       

attached base packages:
[1] stats     graphics  grDevices utils     datasets  base

The Right Directory

If that did not work, you might have seen an error message indicating that the file session-info.R does not exist. Remember that you must be in the correct directory, the one in which you created your script file. You can determine which directory you are currently in using pwd and change to a different directory using cd. For a review, see this lesson.

Now let’s create another script that does something more interesting. Write the following lines in a file named print-args.R:

args <- commandArgs()
cat(args, sep = "\n")

The function commandArgs extracts all the command line arguments and returns them as a vector. The function cat, similar to the cat of the Unix Shell, outputs the contents of the variable. Since we did not specify a filename for writing, cat sends the output to standard output, which we can then pipe to other Unix functions. Because we set the argument sep to "\n", which is the symbol to start a new line, each element of the vector is printed on its own line. Let’s see what happens when we run this program in the Unix Shell:

Rscript print-args.R

/usr/lib/R/bin/exec/R
--slave
--no-restore
--file=print-args.R

From this output, we learn that Rscript is just a convenience command for running R scripts. The first argument in the vector is the path to the R executable. The following are all command-line arguments that affect the behavior of R. From the R help file:

Thus running a file with Rscript is an easier way to run the following:

R --slave --no-restore --file=print-args.R --args

/usr/lib/R/bin/exec/R
--slave
--no-restore
--file=print-args.R
--args

If we run it with a few arguments, however:

Rscript print-args.R first second third

/usr/lib/R/bin/exec/R
--slave
--no-restore
--file=print-args.R
--args
first
second
third

then commandArgs adds each of those arguments to the vector it returns. Since the first elements of the vector are always the same, we can tell commandArgs to only return the arguments that come after --args. Let’s update print-args.R and save it as print-args-trailing.R:

args <- commandArgs(trailingOnly = TRUE)
cat(args, sep = "\n")

And then run print-args-trailing from the Unix Shell:

Rscript print-args-trailing.R first second third

first
second
third

Now commandArgs returns only the arguments that we listed after print-args-trailing.R.

With this in hand, let’s build a version of readings.R that always prints the per-patient (per-row) mean of a single data file. The first step is to write a function that outlines our implementation, and a placeholder for the function that does the actual work. By convention this function is usually called main, though we can call it whatever we want. Write the following code in a file called readings-01.R:

main <- function() {
  args <- commandArgs(trailingOnly = TRUE)
  filename <- args[1]
  dat <- read.csv(file = filename, header = FALSE)
  mean_per_patient <- apply(dat, 1, mean)
  cat(mean_per_patient, sep = "\n")
}

This function gets the name of the file to process from the first element returned by commandArgs. Here’s a simple test to run from the Unix Shell:

Rscript readings-01.R data/inflammation-01.csv

There is no output because we have defined a function, but haven’t actually called it. Let’s add a call to main and save it as readings-02.R:

main <- function() {
  args <- commandArgs(trailingOnly = TRUE)
  filename <- args[1]
  dat <- read.csv(file = filename, header = FALSE)
  mean_per_patient <- apply(dat, 1, mean)
  cat(mean_per_patient, sep = "\n")
}

main()

Rscript readings-02.R data/inflammation-01.csv

5.45
5.425
6.1
5.9
5.55
6.225
5.975
6.65
6.625
6.525
6.775
5.8
6.225
5.75
5.225
6.3
6.55
5.7
5.85
6.55
5.775
5.825
6.175
6.1
5.8
6.425
6.05
6.025
6.175
6.55
6.175
6.35
6.725
6.125
7.075
5.725
5.925
6.15
6.075
5.75
5.975
5.725
6.3
5.9
6.75
5.925
7.225
6.15
5.95
6.275
5.7
6.1
6.825
5.975
6.725
5.7
6.25
6.4
7.05
5.9

A Simple Command-Line Program

  1. Write a command-line program that does addition and subtraction.

    Hint: Everything argument read from the command-line is interpreted as a character string. You can convert from a string to a number using the function as.numeric.

Rscript arith.R 1 + 2

3

Rscript arith.R 3 - 4

-1

Solution

cat arith.R

main <- function() {
  # Performs addition or subtraction from the command line.
  #
  # Takes three arguments:
  # The first and third are the numbers.
  # The second is either + for addition or - for subtraction.
  #
  # Ex. usage:
  #   Rscript arith.R 1 + 2
  #   Rscript arith.R 3 - 4
  #
  args <- commandArgs(trailingOnly = TRUE)
  num1 <- as.numeric(args[1])
  operation <- args[2]
  num2 <- as.numeric(args[3])
  if (operation == "+") {
    answer <- num1 + num2
    cat(answer)
  } else if (operation == "-") {
    answer <- num1 - num2
    cat(answer)
  } else {
    stop("Invalid input. Use + for addition or - for subtraction.")
  }
}

main()

  1. What goes wrong if you try to add multiplication using * to the program?

  2. Using the function list.files introduced in a previous lesson, write a command-line program called find-pattern.R that lists all the files in the current directory that contain a specific pattern:

# For example, searching for the pattern "print-args" returns the two scripts we wrote earlier
Rscript find-pattern.R print-args

print-args.R
print-args-trailing.R

Solution

cat find-pattern.R

main <- function() {
  # Finds all files in the current directory that contain a given pattern.
  #
  # Takes one argument: the pattern to be searched.
  #
  # Ex. usage:
  #   Rscript find-pattern.R csv
  #
  args <- commandArgs(trailingOnly = TRUE)
  pattern <- args[1]
  files <- list.files(pattern = pattern)
  cat(files, sep = "\n")
}

main()

Handling Multiple Files

The next step is to teach our program how to handle multiple files. Since 60 lines of output per file is a lot to page through, we’ll start by using three smaller files, each of which has three days of data for two patients. Let’s investigate them from the Unix Shell:

ls data/small-*.csv

data/small-01.csv
data/small-02.csv
data/small-03.csv

cat data/small-01.csv

0,0,1
0,1,2

Rscript readings-02.R data/small-01.csv

0.3333333
1

Using small data files as input also allows us to check our results more easily: here, for example, we can see that our program is calculating the mean correctly for each line, whereas we were really taking it on faith before. This is yet another rule of programming: test the simple things first.

We want our program to process each file separately, so we need a loop that executes once for each filename. If we specify the files on the command line, the filenames will be returned by commandArgs(trailingOnly = TRUE). We’ll need to handle an unknown number of filenames, since our program could be run for any number of files.

The solution is to loop over the vector returned by commandArgs(trailingOnly = TRUE). Here’s our changed program, which we’ll save as readings-03.R:

main <- function() {
  args <- commandArgs(trailingOnly = TRUE)
  for (filename in args) {
    dat <- read.csv(file = filename, header = FALSE)
    mean_per_patient <- apply(dat, 1, mean)
    cat(mean_per_patient, sep = "\n")
  }
}

main()

and here it is in action:

Rscript readings-03.R data/small-01.csv data/small-02.csv

0.3333333
1
13.66667
11

Note: at this point, we have created three versions of our script called readings-01.R, readings-02.R, and readings-03.R. We wouldn’t do this in real life: instead, we would have one file called readings.R that we committed to version control every time we got an enhancement working. For teaching, though, we need all the successive versions side by side.

A Command Line Program with Arguments

Write a program called check.R that takes the names of one or more inflammation data files as arguments and checks that all the files have the same number of rows and columns. What is the best way to test your program?

Solution

cat check.R

main <- function() {
  # Checks that all csv files have the same number of rows and columns.
  #
  # Takes multiple arguments: the names of the files to be checked.
  #
  # Ex. usage:
  #   Rscript check.R inflammation-*
  #
  args <- commandArgs(trailingOnly = TRUE)
  first_file <- read.csv(args[1], header = FALSE)
  first_dim <- dim(first_file)
#   num_rows <- dim(args[1])[1]  # nrow(args[1])
#   num_cols <- dim(args[1])[2]  # ncol(args[1])
  for (filename in args[-1]) {
    new_file <- read.csv(filename, header = FALSE)
    new_dim <- dim(new_file)
    if (new_dim[1] != first_dim[1] | new_dim[2] != first_dim[2]) {
      cat("Not all the data files have the same dimensions.")
    }
  }
}

main()

Handling Command-Line Flags

The next step is to teach our program to pay attention to the --min, --mean, and --max flags. These always appear before the names of the files, so let’s save the following in readings-04.R:

main <- function() {
  args <- commandArgs(trailingOnly = TRUE)
  action <- args[1]
  filenames <- args[-1]

  for (f in filenames) {
    dat <- read.csv(file = f, header = FALSE)

    if (action == "--min") {
      values <- apply(dat, 1, min)
    } else if (action == "--mean") {
      values <- apply(dat, 1, mean)
    } else if (action == "--max") {
      values <- apply(dat, 1, max)
    }
    cat(values, sep = "\n")
  }
}

main()

And we can confirm this works by running it from the Unix Shell:

Rscript readings-04.R --max data/small-01.csv

1
2

but there are several things wrong with it:

  1. main is too large to read comfortably.

  2. If action isn’t one of the three recognized flags, the program loads each file but does nothing with it (because none of the branches in the conditional match). Silent failures like this are always hard to debug.

This version pulls the processing of each file out of the loop into a function of its own. It also checks that action is one of the allowed flags before doing any processing, so that the program fails fast. We’ll save it as readings-05.R:

main <- function() {
  args <- commandArgs(trailingOnly = TRUE)
  action <- args[1]
  filenames <- args[-1]
  stopifnot(action %in% c("--min", "--mean", "--max"))

  for (f in filenames) {
    process(f, action)
  }
}

process <- function(filename, action) {
  dat <- read.csv(file = filename, header = FALSE)

  if (action == "--min") {
    values <- apply(dat, 1, min)
  } else if (action == "--mean") {
    values <- apply(dat, 1, mean)
  } else if (action == "--max") {
    values <- apply(dat, 1, max)
  }
  cat(values, sep = "\n")
}

main()

This is four lines longer than its predecessor, but broken into more digestible chunks of 8 and 12 lines.

Parsing Command-Line Flags

R has a package named argparse that helps handle complex command-line flags (it utilizes a Python module of the same name). We will not cover this package in this lesson but when you start writing programs with multiple parameters you’ll want to read through the package’s vignette.

Shorter Command Line Arguments

Rewrite this program so that it uses -n, -m, and -x instead of --min, --mean, and --max respectively. Is the code easier to read? Is the program easier to understand?

Separately, modify the program so that if no action is specified (or an incorrect action is given), it prints a message explaining how it should be used.

Solution

cat readings-usage.R

main <- function() {
  args <- commandArgs(trailingOnly = TRUE)
  action <- args[1]
  filenames <- args[-1]
  if (!(action %in% c("--min", "--mean", "--max"))) {
    usage()
  } else if (length(filenames) == 0) {
    process(file("stdin"), action)
  } else {
    for (f in filenames) {
      process(f, action)
    }
  }
}

process <- function(filename, action) {
  dat <- read.csv(file = filename, header = FALSE)

  if (action == "--min") {
    values <- apply(dat, 1, min)
  } else if (action == "--mean") {
    values <- apply(dat, 1, mean)
  } else if (action == "--max") {
    values <- apply(dat, 1, max)
  }
  cat(values, sep = "\n")
}

usage <- function() {
  cat("usage: Rscript readings-usage.R [--min, --mean, --max] filenames", sep = "\n")
}

main()

Handling Standard Input

The next thing our program has to do is read data from standard input if no filenames are given so that we can put it in a pipeline, redirect input to it, and so on. Let’s experiment in another script, which we’ll save as count-stdin.R:

lines <- readLines(con = file("stdin"))
count <- length(lines)
cat("lines in standard input: ")
cat(count, sep = "\n")

This little program reads lines from the program’s standard input using file("stdin"). This allows us to do almost anything with it that we could do to a regular file. In this example, we passed it as an argument to the function readLines, which stores each line as an element in a vector. Let’s try running it from the Unix Shell as if it were a regular command-line program:

Rscript count-stdin.R < data/small-01.csv

lines in standard input: 2

Note that because we did not specify sep = "\n" when calling cat, the output is written on the same line.

A common mistake is to try to run something that reads from standard input like this:

Rscript count-stdin.R data/small-01.csv

i.e., to forget the < character that redirect the file to standard input. In this case, there’s nothing in standard input, so the program waits at the start of the loop for someone to type something on the keyboard. We can type some input, but R keeps running because it doesn’t know when the standard input has ended. If you ran this, you can pause R by typing ctrl+z (technically it is still paused in the background; if you want to fully kill the process type kill %; see bash manual for more information)).

We now need to rewrite the program so that it loads data from file("stdin") if no filenames are provided. Luckily, read.csv can handle either a filename or an open file as its first parameter, so we don’t actually need to change process. That leaves main, which we’ll update and save as readings-06.R:

main <- function() {
  args <- commandArgs(trailingOnly = TRUE)
  action <- args[1]
  filenames <- args[-1]
  stopifnot(action %in% c("--min", "--mean", "--max"))

  if (length(filenames) == 0) {
    process(file("stdin"), action)
  } else {
    for (f in filenames) {
      process(f, action)
    }
  }
}

process <- function(filename, action) {
  dat <- read.csv(file = filename, header = FALSE)

  if (action == "--min") {
    values <- apply(dat, 1, min)
  } else if (action == "--mean") {
    values <- apply(dat, 1, mean)
  } else if (action == "--max") {
    values <- apply(dat, 1, max)
  }
  cat(values, sep = "\n")
}

main()

Let’s try it out. Instead of calculating the mean inflammation of every patient, we’ll only calculate the mean for the first 10 patients (rows):

head data/inflammation-01.csv | Rscript readings-06.R --mean

5.45
5.425
6.1
5.9
5.55
6.225
5.975
6.65
6.625
6.525

And now we’re done: the program now does everything we set out to do.

Implementing wc in R

Write a program called line-count.R that works like the Unix wc command:

  • If no filenames are given, it reports the number of lines in standard input.
  • If one or more filenames are given, it reports the number of lines in each, followed by the total number of lines.

Solution

cat line-count.R

main <- function() {
  args <- commandArgs(trailingOnly = TRUE)
  if (length(args) > 0) {
    for (filename in args) {
      input <- readLines(filename)
      num_lines <- length(input)
      cat(filename)
      cat(" ")
      cat(num_lines, sep = "\n")
    }
  } else {
    input <- readLines(file("stdin"))
    num_lines <- length(input)
    cat(num_lines, sep = "\n")
  }
}

main()

Key Points

  • Use commandArgs(trailingOnly = TRUE) to obtain a vector of the command-line arguments that a program was run with.

  • Avoid silent failures.

  • Use file("stdin") to connect to a program’s standard input.

  • Use cat(vec, sep = " ") to write the elements of vec to standard output, one per line.

previous episode

next episode